Drive battery

AIM 4 TPZS 620

Condition: used, From € 94,20 now for € 65,94. Now with a 30% discount. Used steel stacking box, the walls and bottom are made of a flat steel plate. The dimensions are 810 x 620 x 460 mm. L: 810, W: 620, H: 460 (mm). Product: Stacking box steel. Type: Fixed construction stacking box. Version: 4 sides. Material: steel. Walls: flat steel plate. Floor: flat steel. Euronorm (mm): 800 x 600. Colour: grey. Surface treatment: painted and use damage. Internal length (mm): 795. Internal width (mm): 570. Internal height (mm): 250. Volume (ltr): 112. Weight (kg) 50. Type number: 5681GB. Bdkfr7Cxh

Condition: new, machine/vehicle number: 80V4MDL155A, Year of construction: 2024, fuel type: electric, Forklift battery for 3 t Still, Linde, Jungheinrich, Hyster Type 80 V 4 PzS 620 Length: 1030 Width 711 H 784 mm Weight: 1550kg Incl. Aquamatik and Rema 320 plug Cdgemkuo Delivery: from warehouse, 26160 Bad Zwischenahn, Germany Payment: advance payment

Year of construction: 2020, Condition: excellent (used), Functionality: fully functional, fuel type: electric, Forklift battery 80V 4PzS620 battery 68% TESTED Year of manufacture: 2020 Dimensions (lxwxh): 1025mmx710mmx784mm Bsm7Oseyati Weight 1558kg Battery assembled from two 48V 620 DIN C batteries Battery was serviced and tested by a specialist company. Capacity test (C5 discharge test) 422/620Ah battery Remaining capacity: 68% percent With Aquamatik filling system (BFS) With pole screws but WITHOUT end discharge

Condition: new, Year of construction: 2024, Functionality: fully functional, Workbench with 4 extendable arms. Extendable arms that allow to extend the surface of the table. Work surface protected with rubber. Dozyij Electrical and pneumatic outlets on the bench itself.

Mileage: 945,000 km, fuel type: diesel, color: other, axe configuration: 6x2, fuel: diesel, wheelbase: 39,000 mm, brakes: intarder, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, Year of construction: 2009, Condition: used, Equipment: ABS, cruise control, differential lock, spoiler, = Further options and accessories = - 6x2 - Roof spoiler - Electric windows - High beam - Fridge - Fog lights - Radio/CD player - Sleeping cabin - Sun protection flap - Tool box - Power take-off shaft (PTO) = Further information = General information Year of construction: 2009 Gearbox: optiecruise Transmission: optiecruise, 12 gears, automatic Axle configuration Suspension: Air suspension Front axle: LM rims; steered Rear axle 1: Differential lock; LM rims Rear axle 2: LM rims; lift axle; steered condition General condition: good Technical condition: good Visual condition: good Gxc8Vsu Damage: none

Mileage: 287,900 km, power: 302 kW (410.61 HP), first registration: 03/2017, overall weight: 26,000 kg, fuel type: diesel, color: white, axe configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space width: 2,480 mm, loading space length: 6,600 mm, loading space height: 1,000 mm, Year of construction: 2016, Condition: used, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, HMF 2620-K3 rear-mounted crane. Articulated boom, floor and radio remote control, slewing head with stone tongs. Diagram: 4.4 m - 5,370 kg, 6.3 m - 3,680 kg, 8.2 m - 2,760 kg, 10.2 m - 2,210 kg. * Trailing steering axle liftable, completely new tires. ---- Platform with heavy-duty rail in the load compartment floor. ----* Axle pressure indicator, front and rear * Transmission 12-speed automatic * Hill hold * Front axle with air suspension * Differential lock rear axle * Rear axle with air suspension * Trailing axle can be lifted * Duomatic brake connection * Anti-lock braking system (ABS) * 2-line trailer brake (EG) * Scania Emergency Brake Assist (AEB) * Electronic Stability Program (ESP) * Disc brake * Scania lane departure warning system (LDW) * M cab (medium length) * Roof hatch in cab * Transparent exterior sun visor * Electrically adjustable and heated exterior mirrors * Electric windows for driver and passenger door * Central locking with radio remote control * Immobilizer (transponder) * Scania Opticruise transmission without clutch pedal * Automatic air conditioning * Auxiliary hot-air heating * Heating for driver's seat * 6-cylinder engine * Reversing camera * Tank 400 liters Bsjdlvm8Qek * Hydraulic tank 200 liters * Fog lights * Rotating beacon left and right * Euro 6 engine version * Fuel preheating * Exhaust brake * GPS-controlled cruise control * Engine version with AdBlue * Aluminum load compartment floor * Flatbed with aluminum side walls * Outer perforated frame for load securing * Maul trailer coupling * Air-sprung driver's seat * Steered trailing axle * Central lubrication system * EBS * Without spare wheel ----Sale only to tradesmen! Without guarantee for the information! Subject to prior sale! Our general terms and conditions apply exclusively! We would be happy to make you a leasing or financing offer.

Mileage: 382,400 km, power: 265 kW (360.30 HP), first registration: 07/2017, overall weight: 26,000 kg, fuel type: diesel, color: white, axe configuration: 6x2, maximum load weight: 12,130 kg, empty load weight: 13,870 kg, wheelbase: 5,800 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 8,000 mm, Condition: used, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, soot filter, Mercedes- Benz Actros 2536 6X2 flatbed with crane EZ.: 07/ 2017 382,400 KM with receipts Euro6 emission class short cab automatic gearbox climate control Lane departure warning Adaptive cruise control Leaf/air suspension 3rd axle liftable and steerable Wheelbase 5800mm Tires 385/55 R22.5 tread approx. 50% Tires 315/70 R22.5 tread approx. 50% Flatbed 8000mm Drop sides 600mm Loading height 1150mm Unladen weight 13.870Kg Crane HMF 2620 K5 Year of construction 2017 Radio remote control (radio remote control) Bsiojmqxxcc 5x hydraulically extendable 4.60m/ 4980Kg 6.40m/ 3350Kg 8.40m/ 2450Kg 10.40m/ 1900Kg 12.50m/ 1540kg 14.70m/ 1300Kg Hook height approx. 18.50 meters the vehicle is from 1st hand. The technical inspection is still valid until July 2025. Net/ export price: 65,900 euros All information without guarantee, errors excepted.

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding, composed of the following machines: XZ1900A) Loader (Double-cage, double pick-up) "MEINERT" Mod. P 620 D/B - L 2500 / 1000 with central motorized rollers table. With two external roller ways to in-feed the piles (stacks) of panels to loader. XZ1900B) 1st Double-side Sizing & Edge Bander "IMA" Mod. Combima / II / 440 / A / R3 XZ1900C) Connecting Roller Table "IMA" Mod. IDK L/Q 2800 / 1300 with turning device (from lengthwise to crosswise) with double cone system. Bo8Ptv3I XZ1900D) 2nd Double-side Sizing & Edge Bander "IMA" Mod. Combima / II / 500 / B / R3 XZ1900E) Connecting Roller Table "IMA" Mod. IDK Q/L 2800 / 1300 with Turning device (from crosswise to lengthwise) with double cone system. XZ1900F) Unloader (Double-Cage, double storage) "MEINERT" Mod. P 620 D/S - L 2500 / 1000 With central motorized rollers table. With 2 on-ground motorized roller ways to out-feed the piles (stacks) of panels from the Unloader.

Mileage: 382,400 km, power: 265 kW (360.30 HP), first registration: 07/2017, overall weight: 26,000 kg, fuel type: diesel, color: white, axe configuration: 6x2, maximum load weight: 12,130 kg, empty load weight: 13,870 kg, wheelbase: 5,800 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 8,000 mm, Condition: used, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, soot filter, Mercedes- Benz Actros 2536 6X2 flatbed with crane D.O.T.: 07/ 2017 382,400 KM with receipts Euro6 emission class short cab automatic gearbox F3Jaokh climate control Lane departure warning Adaptive cruise control Leaf/air suspension 3rd axle liftable and steerable Wheelbase 5800mm Tires 385/55 R22.5 tread approx. 50% Tires 315/70 R22.5 tread approx. 50% Flatbed 8000mm Drop sides 600mm Loading height from floor to top edge of platform 1150mm Unladen weight 13.870Kg Crane HMF 2620 K5 Year of construction 2017 Radio remote control (radio remote control) 5x hydraulically extendable 4.60m/ 4980Kg 6.40m/ 3350Kg 8.40m/ 2450Kg 10.40m/ 1900Kg 12.50m/ 1540kg 14.70m/ 1300Kg Hook height approx. 18.50 meters the vehicle is from 1st hand. The technical inspection is still valid until July 2025. Net/ export price: 65,900 euros All information without guarantee, errors excepted.

Condition: used, Year of construction: 2015, Cutting length max: 6.200 mm Number of saw blades: 1 Sägeblattüberstand max.: 215 mm Saw blade diameter max: 650 mm Feedrate max: 80 m/min Adjustable feedrate: Yes Cbpucim9 Alignment laser: Yes Lamella protection: Yes Hold-down devices: Yes Controlled stop: Yes Control: PRO-FACE, Touchscreen Conformity marking: CE mark Weight: 3.025 kg

Condition: excellent (used), Year of construction: 2019, operating hours: 4,650 h, Functionality: fully functional, TECHNICAL DETAILS Machine frame: tempora 45.03L, made of thick-walled electro-welded steel construction Control system x-motion plus control: swivel-mounted 15" smartouch Unlimited storage space for user-defined edging programs Optimization of edge protrusions during front and rear pre-cutting Chain feed Feed speed: 9 m/min Drive motor: 1.5 kW (S6) Precision running and guide surfaces Minimum workpiece length: 140 mm Minimum workpiece width: 70 mm Segmented, rubberized support pads with quick-change system Turntable edge magazine Roller edging material diameter: 740 mm Roller edging material Edge thickness: 0.4 - 3 mm Pull-out frame Workpiece support: extendable up to 450 mm with roller conveyor for ergonomic working with larger workpieces Upper pressure beam Workpiece height: 8-45 mm Pressure beam made of welded, torsion-resistant steel construction Top pressure rollers arranged in two rows and offset Edge feed Driven rubberized feed roller Edge thickness: 0.4 - 3.0 mm Workpiece feed Extendable workpiece support: up to 450 mm Removable table support with 1000 mm and extended stop ruler Chip removal joining unit: 0 - 2 mm (on the feed ruler), digital counter Joining unit Power: 2.2 kW, diamond cutter Z2, speed: 12,000 rpm 2x1.1 kW (1.5 HP) Chip removal: max. 2 mm Workpiece height: max. 45 mm Jointing cutter with diamond cutting edges Z2+2, D-80 x 49 mm (angled and tear-free workpiece edge) Gluing unit Glue unit: Teflon-coated, for 1.5 kg EVA or PUR granulate Heating time: 10 minutes Running meter capacity: 375 running meters (with 19 mm board) Finely adjustable glue roller Pressure unit 1 aluminum roller at a 90° angle 1 rubberized pressure roller Impact shears Roller edge material thickness: 0.4 - 3 mm Used for precutting, oscillating Cross-cut saw unit 0.15 kW, speed 12,000 rpm with 90° round shaft guide Cross-cut saw unit with 45° travel with 0.35 kW, 12,000 rpm A choice between 0° and 10° cut is possible Trimming unit Multi-function trimming unit: x-motion plus, 2 high-frequency motors, 0.75 kW each, 12,000 rpm Alternate cutting edges: 4 pieces each Accuracy: 2-axis adjustment enables fine adjustment in the 1/100 mm range B7Ynqkap Motorized corner rounding unit Corner processing unit for postforming and softforming profiles Workpiece height: 10 - 45 mm Edge thickness: 0.4 - 3 mm HW milling cutter with 2 cutting edges Radius: max. 6 mm Workpiece length: min. 270 mm (at 19 mm height) Radius scraper unit Processing of 2 mm plastic edges Scraper adjustment via digital counter and m-motion positioning system Scanning of the workpiece contours Polishing unit Upper and lower polishing unit Spraying device for cleaning agents Surface scraper Upper and lower surface scraper for any adhesive residue. Scanning of the workpiece contours Multifunctional trimming unit for cup hinge drilling for processing workpieces with cup hinge holes, rear wall grooves and acute-angled workpieces EQUIPMENT - x-motion PLUS package for semi-automation of the units - Spray-on device for release agent on the machine infeed side - Spraying device for lubricant - Pneumatic-mechanical insertion lock to prevent premature loading of the machine - Easy-clean cleaning device Standard glue tray - Infrared heating lamp

Year of construction: 2016, Condition: used, Used machine Cross sanding machine Year of construction 2016 Product advantages Underneath perfectly lacquered, stained or oiled wood surfaces there is always a perfectly sanded surface! Felder sanding machines are characterized by solid construction, state-of-the-art machine technology and maximum productivity. The most important highlights at a glance: ? Sanding width 1350mm ? Sanding width 3-170mm ? Combined superfinishing unit ? Touch-screen control for work processes ? The Felder operating concept guarantees maximum process and work safety Your advantages at a glance: Time saving ? Motorized adjustment of the contact roller in the 1/100 mm range from the control panel ? Innovative unit arrangement for pre-sanding / fine sanding of veneered workpieces ? Brushing devices at the machine outlet ? Lacquer sanding against additional equipment ? comfort ? Fixed feed table height (machine head adjusts) ? Touch screen control with clear image display and program memory ? Machine data acquisition for sanding belt wear and much more. ? Tool-free handling when changing the sanding belt ? Large fold-down table extensions for the heaviest workpieces ? flexibility ? Units for calibration, fine sanding and lacquer sanding ? Variable feed speed up to 20 m/min by means of inverter Innovation ? Electronically segmented sanding pad with silicone technology for minimum air consumption ? Combined superfinishing unit incl. chevron sliding belt to compensate for oscillation marks ? quality ? Solid machine construction ? Durable machine components Basic equipment Control unit finish 1350 classic Control unit with 7" color touch screen 100 program memory locations Maintenance intervals Plain text error messages Ammeter for load monitoring Bka09Wjg7Uw Feed table fixed infeed height - fixed table, 900mm, electric height control of the units incl. fine adjustment from the control panel, V-speed infinitely variable from 2.8-20m/min. Adjustable via inverter from the control panel Manual protection and workpiece over-thickness protection Workpiece detection sensor with 25 sensors 55 mm segment width Endlessly manufactured belt conveyor with honeycomb structure Automatic feed carpet centering Cross sanding unit finish 1350C high gloss Segmented, electronic-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Chevron sliding belt between sanding pad Sanding belt for homogeneous sanding without oscillation marks Variable pressure control on the operating side Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection 1 motor with 7.5 kW (10 hp) Star-delta start-up Cleaning fan with time control Cutting speed 12 m/sec Sanding belt 140 x 4560 mm Combined superfinishing unit 1350C: Rubberized, grooved contact roller with 85-90° Shore hardness and 142 mm diameter Electromot. Position-controlled grit compensation segment, electro-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Variable pressure control on the operating side Chevron sliding belt between sanding pad and sanding belt belt for homogeneous sanding without oscillation marks Mechanically pre-tensioned rubber pressure rollers Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection

Condition: used, Year of construction: 2018, Working dimension X: 3.500 mm Working dimension Y: 950 mm Working dimension Z: 80 mm Number of milling spindles: 1 Main motor power: 12 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 4 Dqn3Zn Linear tool changer: Yes Vertical drilling spindles: 17 FORMAT 4 Drilling aggregate DH 25 8H 1S: Yes Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Barcode reader: Yes Dowel insertion: Yes Safety device: enclosed cabin Handheld terminal: Yes Tool charge measurement: Yes Workpiece length measurement: Yes Software: FORMAT 4 WOOD FLASH, PC office licence Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 14,4 kW

Condition: excellent (used), PART NUMBER 6651 TECHNICAL DATA - max width of workpiece 220mm - max height of workpiece 120mm - 4 spindles: 1) horizontal bottom 220mm 4kW 2) vertical right 120mm 4kW 3) vertical left 120mm 4kW 4) horizontal top 220mm 5.5kW - all spindles adjustable up/down, right/left - diameter of spindles 40mm - from top 4 pulling input shafts, toothed including 2 double ones - from top 1 pulling out roller , smooth, rubber - bottom rubber trailing outfeed roller - pneumatically pressed rollers - feed on cardan rollers - feed motor 1.1kW - lifting motor 0.37kW - electrical adjustment of planing thickness - length of the input table 1980mm - side pressure - stepless adjustment of feeding speed 8-16m/min - central lubrication - diameter of the exhaust stub 5x140mm - closed in the cabin - dimensions L/W/H 3400x1500x1700mm - weight about 1670kg C7H7Vlakm Net price: 39900 PLN Net price: 9060 EUR Net price calculated according to exchange rate 4,40 PLN/EUR (with greater fluctuations in the exchange rate, the price may change)

Condition: good (used), Functionality: fully functional, 2x1kW motors maximum diameter of grinding wheels 250mm maximum width of grinding wheels 25mm grinders mounted on pedestal Cqdi8Lknva

Condition: used, Year of construction: 2007, Year of manufacture: 2007 Condition: good Fully automatic adjustment Configuration: - Number of pockets: 4 - Cross-break - knife / bottom pocket / knife - automatic pocket adjustment - automatic roller adjustment - touch screen - MBO unloader - drum with press Ccnkudqj Technical specifications: - Max. format: 780 x 1120 mm - Speed: max. 215 m/min

Condition: excellent (used), Year of construction: 2020, For sale is an edge banding machine Felder Format Tempora F600 from 2020 in full equipment. The machine is in very good condition and comes from the first owner. Technical specifications Special features: NESTING construction Maximum edge thickness: 6 mm Maximum edge height: 65 mm Maximum roll edge thickness: 3 mm Minimum material length: 140 mm Maximum feed speed: 10 m/min Electric height adjustment Heating zone Hot melt adhesive system: Lower adhesive tank Replaceable adhesive tank Spraying device Pre-cutter Cross-cut saw: 2 motors Straight and radius routing units: 1 Rounding unit: 2 motors Cycle milling unit: Profile and flat milling Polishing unit Edge magazine Cycle end units: NC axes Design: Right-hand machine Machine length: 4,412 mm Infeed guide Cpypnwe0Rc Control system: FORMAT 4 SMARTOUCH X-MOTION PLUS CE marking Total output: 15 kW

Condition: used, Year of construction: 2014, Used machine Used edge banding machine of the company Format 4 type Perfect 710 E - Motion Year of construction: 2014 MNo.: 200.02.011.14 Technical data: Control unit with 10.4" touch color screen Extendable workpiece support motorized - position-controlled pressure beam chain feed with 12m/min feed speed Roller support plate with ball bearings d = 770 mm Hpxtgozo 2 motorized joint milling unit / 2 x 1.1 kW Edge feed for roll and strip material 0.4 - 10 mm (edge detection via infrared sensor) Teflon-coated gluing unit Pre-melting unit for EVA glue Replacement gluing unit for EVA Replacement gluing unit for PU motorized positioning-controlled pressing unit 2 motorized cross-cut saw unit / 2 x 0.50 kW 2 motorized multifunctional units for radius, flush and chamfer trimming / 2 x 0.75 kW Corner processing unit Radius scraper Surface scraper 2 motorized polishing unit (buffing wheel) Spraying unit for release agent on the machine infeed side Spraying unit for cleaning agent in front of the polishing unit Availability:short term Location: Flörsheim

Condition: used, Year of construction: 2023, Working dimension X: 3.300 mm Working dimension Y: 1.280 mm Working dimension Z: 250 mm Number of milling spindles: 1 Main motor power: 12 kW Rotation speed max: 24.000 rpm 4th axis: C-axis Tool clamping system: HSK-F63 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction, in Y-direction Gantry machine: Yes Dqmuad Machine table: Pod and rail table Number of consoles: 6 Positioning aid: Yes Vacuum pump: Yes Safety device: Bumper Interface for .dxf data: Yes Crosshair laser: Yes Software: FORMAT 4 WOOD FLASH Weight: 3.650 kg Space requirement Length: 6,3 m Space requirement Width: 4,3 m Space requirement Height: 2,3 m

Condition: excellent (used), PART NUMBER 7221 TECHNICAL DATA - min / max width of the workpiece 45 / 150mm - min / max height of workpiece 15 / 50mm 3 spindles: 1) horizontal bottom 11kW 2) horizontal top 22kW (7000rpm) 3) horizontal lower 5.5kW Bqakjqgmme diameter of spindles 40mm - spindle 1 and 3 manually adjustable up/down, right/left - spindle 2 manually adjustable right/left - spindle 2 electrically adjustable up/down - spindle 2 and 3 are equipped with brakes top: - 3 infeed, pulling, metal toothed rollers - 1 double infeed, pulling, rubber roller from below: - pressure on the introduction - corrugated top - pulling roller, metal, smooth - electric setting of planing thickness - smooth adjustment of the feed speed 6-24m/min - feed motor 3kW - feed on cardan rollers - length of the input table 1970mm - automatic system of table top lubrication - diameter of the exhaust stub 1x150mm, 2x140mm - dimensions L/W/H 3070x2000x1800mm - weight 2000kg ATTRIBUTES - made in Germany - for 3 heads - for processing lamellas - grooved top - heads included - unpainted - very good condition - used planer Net price: 175900 PLN Net price: 39970 EUR Net price calculated at the rate of 4.4 PLN/EUR (with major exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2017, operating hours: 1,324 h, Functionality: fully functional, machine/vehicle number: 26.12.010.16, TECHNICAL DETAILS Sanding width: 1350 mm Sanding height: 3 - 170 mm Lacquer sanding: YES Dqmclx

Condition: excellent (used), For sale Format 4 Kappa V 60 panel saw. Very good condition, first hand from a 2 man joinery. Everything works perfectly! - Year of construction: 2014 - Cutting length: 4300mm - Cutting depth: 60mm - Lateral dust collection channel - Continuous center support - 3.9 kW - Long connection cable with plug - incl. operating instructions You will receive an invoice with VAT shown. Please contact us if you have any questions Shipping is possible throughout Germany Cky2D8Pepa Forklift for loading is available

Condition: like new (used), Year of construction: 2024, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights height 3,000 mm with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg Bhdwvxp7Zg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2024, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights height 3,500 mm with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany Ibkj8N9 - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2024, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. Bfvqg039Uj We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.