Spare parts for Aigner-stop Aigner

Call

Listing

Gerolzhofen

(dealership location)

7947 km

cocking drawer

Aigner 214283000192

new

€210

Call

Description:Safe and economical working is achieved with the clamping serves to prevent accidents, especially when inserting short workpieces in connection with the Aigner table rdy, lightweight tension drawer made of aluminiumTotal length 800mmClamping length 550 mmScope of delivery:1 x clamping drawer Qzx0v

Listing

Langenfeld (Rheinland)

7673 km

Clamping drawer

Aigner Spannlade

good (used)

€130

Filter suction unit dust extractor

Call

Protective device from Aigner for clamping small parts when milling, etc. This protective device is often recommended by the BG. Cwyxqv0zvu The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Listing

Tatabánya

8572 km

AIGNER ECOPLASMA 11 kW 7200m3/h (2112)

good (used)

€9,900

Call

Manufacturer: Aigner Tip: ECOPLASMA Engine power: 11 kW Hd72k93 Suction capacity: 7200m3/h Filter cartridge: 9 pieces

Listing

Lambsborn

7809 km

AIGNER

excellent (used)

Spare parts for Aigner integral stop

Call

Listing

Geldern

7609 km

Aigner

2023

new

Call

Listing

Gerolzhofen

(dealership location)

7947 km

Push handle for saws and routers

Aigner Quickly

new

€34

Call

Description:The Quickly can be fastened at any point over the entire width of a sliding block with a simple push of a special function of the tips ensures a secure ce Quickly on the desired position on the pusher. When the lever is pushed forward, the front tips claw into the pusher from above and at the same time pull the rear tips into the front of the pusherScope of delivery:1 x Quickly with special key Rccvn

Listing

Lambsborn

7809 km

AIGNER

excellent (used)

Call

Listing

Geldern

7609 km

Clamp strip

Aigner

2023

new

Call

Chuck Make: Aigner Stable, light clamping device made of aluminium. Beqze8luro Length: 800 mm Clamping length: up to max. 550 mm Infinitely adjustable counter jaw The long handle enables a safe guiding of the workpiece and protects the hands during milling.

Listing

Gerolzhofen

(dealership location)

7947 km

push stick

Aigner

new

€12

Call

Description:For safely guiding narrow workpieces on table and sliding table saw Aigner push stick is made of wood and is therefore environmentally friendly, easy to machine, protects the cutting edges and pe of delivery:1 x push stick with holding magnets Chzpinumzw

Listing

Lambsborn

7809 km

AIGNER

excellent (used)

Fastening rail 430 mm for table router

Call

Listing

Geldern

7609 km

Integral fence

Aigner

2023

new

Call

Integral stop Make: Aigner 500/500 - Both stop halves 500 mm long each We supply all Aigner products. We supply: B833jogc Aigner safety technology for professional woodworking.

Listing

Gerolzhofen

(dealership location)

7947 km

Aigner

new

€20

Call

Description:The universal basic element for accommodating Aigner safety and working Aigner mounting rail is used for fast and secure attachment of safety and work devices without the use of pe of delivery:1 x Aigner mounting rail Yvrkkc

Listing

Lambsborn

7809 km

AIGNER

excellent (used)

Spare parts for Aigner integral stop

Call

Listing

Geldern

7609 km

Aigner Integralanschlag

2023

new

Call

Spare parts for Aigner integral stop. Make:Aigner -Bottom bar -bridge -axle Currently available from stock. Ygy9yaidp

Listing

Gerolzhofen

(dealership location)

7947 km

Table extension

Aigner

new

€237

Call

Description:With optimum kickback protection when Aigner table extension is essential for insert cross stop, length 400 mm, is infinitely adjustable, can be swiveled by 90° and is easy to remove. Chzpnzjsci

Listing

Gerolzhofen

(dealership location)

7947 km

Filler rod

Aigner

new

€34

Fastening rail length 230 mm for table router

Call

Description:The filling rod closes the lower recess in the left-hand cassette of the integral stop and thus also creates an uninterrupted guide surface in this surface is coated with a hard coat layer. Rccwl

Listing

Gerolzhofen

(dealership location)

7947 km

Aigner

new

€15

Spacer with drilling template for table router

Call

Description:The universal basic element for special casesThis mounting rail is required if safety and working devices are to be attached along the entire length of the pe of delivery:1 x mounting rail 230 mm Chzpqpeewr

Listing

Gerolzhofen

(dealership location)

7947 km

Aigner

new

€45

Fastening rail length 530 mm for table router

Call

Description:Must not be missing from any feeder. The spacer protects against damage to the feed rollers, milling tool and stop ck and stepless adjustment of the distance between the feed unit and the fence using the clamping lever. Maximum adjustment to both stic support caps prevent damage to the r socket head screws for attachment to the feeder. Interchangeable with grub screws E.Eight grub screws to compensate for uneven mounting surfaces. Interchangeable with socket head screws D.Spacers mou...

Listing

Gerolzhofen

(dealership location)

7947 km

Aigner

new

€22

Fastening rail 330 mm for table router

Call

Listing

Gerolzhofen

(dealership location)

7947 km

Aigner

new

€18

Fastening rail length 830 mm for table router

Call

Listing

Gerolzhofen

(dealership location)

7947 km

Aigner

new

€29

Deflector for deflecting short workpieces

Call

Listing

Gerolzhofen

(dealership location)

7947 km

Aigner

new

€28

Call

Description:With two strong holding magnets, the deflector can be easily, quickly and securely fixed in any desired position on the machine pe of delivery:1 x deflector Chzphra27t

Listing

Gerolzhofen

(dealership location)

7947 km

Spacer

Aigner

new

€37

Centrex with drilling template for table router

Call

Description:Indispensable when milling easily tilting workpieces with the integral stopThe spacer is clamped at the desired height in a groove of the integral stopScope of delivery:1 x spacer incl. Allen key and instructions for use Chzpwxm02g

Listing

Gerolzhofen

(dealership location)

7947 km

Aigner

new

€595

Table extension without stop and rail

Call

Description:Sets new standards for economical and safe Centrex is characterized by its solid construction, attractive design and optimal arrangement on the stop housing. All functions can be set quickly and effortlessly in just a few movements and without special shape of the pressure shoes ensures precise workpiece guidance with a good view of the work process. Pressure can also be exerted on the workpiece when insert rdy cast aluminum with hard coat tical workpiece guide made of aluminum wit...

Listing

Gerolzhofen

(dealership location)

7947 km

Aigner

new

€185

Call

Description:Table extension as an optimal support for processing Aigner table extension replaces an assistant when processing long workpieces. It is also used to hold various devices such as the ure, lightning-fast mounting on the mounting rail using clamping levers; the Aigner table extension can be easily moved and quickly removed foot is foldable and snaps into place ll footprint when ble aluminum table, length 1100 mm, width 172 mm, height 755 – 1000 surface is tempered by or-friendly pla...

Listing

Gerolzhofen

(dealership location)

7947 km

Table extension

Aigner

new

€218

Call

Description:Table extension with optimum kickback protection when cross stop, length 400 mm, is infinitely adjustable, can be swiveled by 90° and is easy to pe of delivery:Table extension with cross stop Bgek8r0o

Listing

Gerolzhofen

(dealership location)

7947 km

Joint strip

Aigner

new

€81

Call

Description:For safe guidance of the workpieces when joining on the surface planing ning a workpiece with the joining ning a narrow workpiece with the joining bar and the auxiliary ning a long workpiece with the joining bar and the table rage of the joining strip behind the h the clamping lever, the jointing strip can be adjusted quickly and steplessly to the width of the tening rail for holding the joint strip and the table extension. Chzpubsig7

Listing

Gerolzhofen

(dealership location)

7947 km

Clamping shoe

Aigner

new

€24

precise workpiece guidance f. table millingmachine

Call

Description:The clamping shoes can be attached to the mounting rail, the integral stop and the mounting plate to accommodate pe of delivery:1 x clamp shoe 172 mm Bgnjb0tm

Listing

Gerolzhofen

7947 km

Aigner Contermax

new

Auxiliary fence swivel for planer

Call

Description: For precise and fast profiling of workpieces on the short side. The Contermax enables safe and economical work. A high degree of dimensional accuracy is achieved thanks to the precise workpiece guidance. Lightning-fast change of the workpiece with new type of clamping. Aluminum body, surface hardened by anodizing, length 420 mm, clamping length 200 mm. The long, stable aluminum handle, plastic-coated, ensures that the workpiece is guided safely. The infinitely adjustable sliding bar...

Listing

Gerolzhofen

7947 km

Aigner

new

€154

Call

Description: Iehasz9k0 The auxiliary fence for the safe planing of narrow workpieces is immediately at hand when it is needed - just swivel, no tiresome assembly and disassembly. Scope of delivery: 1 x auxiliary stop with bearing plates, screws, open-end wrench

Listing

Gerolzhofen

7947 km

cocking drawer

Aigner

used

€140

Call

used make Aigner length approx. 800 mm storage place 97447 Gerolzhofen, free loaded, unpacked delivery in as-is condition as viewed without warranty and guarantee 2u08qi

Listing

Eilenburg

(dealership location)

7973 km

Panel van

Mercedes-Benz Sprinter 319CDI V6 Camper Oberaigner 4x4 SPERRE

used

€109,118

Swivel spindle milling machine

Listing

Gerolzhofen

7947 km

Martin T 25

1994

used

€9,500

Fields Format 4 Perfect 710 E Motion

Call

without feed unit with digital routing stop used, good condition, top equipment make Martin type T 25 year of construction 1994 machine-Nr. V 213075 GS-tested GS-wood dust tested motor 5/6 kW reinforced swiveling from 5° to -45° motor 2 speeds/pole reversible 4 speed levels 3000/4500/6000/9000 rpm. right-left running table top extension approx. 2700 mm Frame support extendable Milling arbor diameter 30 mm Aigner integral stop jaws Milling stop with fine adjustment Digital displays for milling st...

Listing

Baden-Württemberg, Deutschland

7969 km

Swivel milling machine

Panhans 259

1981

used

Call

Second hand machine Year of manufacture: 1981 Table size 1100 x 760 mm Cy8g3cjqv9 motor 4,7/5,7 kW pole-changing with right/left rotation Milling arbor MK 5/ 30 mm Height and swivel adjustment by means of handwheel Speeds 3000/4500/6000/9000 rpm Swivel range of the milling arbor - 5 to + 45 °. Milling flange stop with Aigner stop jaws mounted on round insert plate and therefore 360° rotatable with Festo feed device Weight approx. 850 kg Pictures show machine in not yet checked condit...

Listing

Paderborn

7738 km

Felder Perfekt 710 E Motion

2014

excellent (used)

€20,000

ONO VAT not applicable

Call

A used machine is offered, available at short notice. Manufacturer Format 4 Type Perfect 710 E - Motion Year of manufacture 2014 Technical data: control unit with 10,4" touch color screen extendable workpiece support motorized - position controlled pressure beam chain feed with up to 12m/min feed speed 2 motorized joining milling unit / 2 x 1,1 kW milling cutter Aigner Konstantin with exchangeable cutting edges to change blunt cutting edges and immediately continue working. edge feed for rol...

Listing

Rodgau - Jügesheim

(dealership location)

7855 km

Tischfräsmaschine schwenkbar

Hofmann TFS 107

used

€20,200

Swivel spindle moulder Martin T 23

Call

Neue Ausstellungsmaschine!! Listenpreis 22.433 netto · Tischgröße 1.200 x 815 mm, stark verrippter Gusstisch, feinst gehobelt; Maschinenhöhe 890 mm · Tischringe Æ 262/220/160/115 mm; · Werkzeug Æ 250/200/140/100/65 mm Cxc7g2kdwp · Fest eingebaute Frässpindel (nicht wechselbar) mit Fräsdorn Æ 30 mm inkl. Schnellspannmutter fix (für den schnellen, komfortablen Werkzeugwechsel ohne Spindelblockierung), Aufspannlänge 140 mm · Elektrische Höhenverstellung der Frässpindel ca. 145 mm im Eil- und ...

Listing

Schalksmühle

7697 km

Martin T 23

1977

excellent (used)

€4,250

Call

Dear Sir or Madam, offered is a swivel spindle moulder T 23 from the quality manufacturer Martin in a very good condition with feed attachment from HolzHer. The machine is very robustly processed, absolutely reliable and fully functional. There are also very many accessories - from knives, drivers, 3 Aigner stop rails to spare parts. The accessories are not included in the price. Data and facts Year of manufacture: 1977 Power motor: 7,5 KW Power feed: 750 W swivel range spindle: -5 to + 45 de...

Listing

Tauberbischofsheim

7924 km

Miscellaneous

Garniga Tekno 68/78/90 mm

used

Call

Window tool set GARNIGA TEKNO for wood-aluminium windows in IV 68, 78 and 90. Suitable for Weinig Unicontrol 10 or similar angle systems. - Windows Tekno wood-aluminium -Manufacturers: Garniga and Aigner -Drawings for download on request -Very good condition -Incl. comprehensive set of replacement blades -Cleaned Incl. storage and transport rack. Cxixoxd99n

Listing

Gerolzhofen

(dealership location)

7947 km

surface planer

Fimal PF 530 N Partnership Edition

new

€10,650

Fully automated aluminum forging line

Call

exhibition machineFIMAL surface planer type PF 530 N,Partnership EditionTechnische Daten:Abrichttischabmessung: 3.000 x 530 mmAufgabetischlänge: 1.800 mmAbrichtanschlagabmessung: 1.500 x 175 mmtilting range fence: 0 - 45 °4-knife-Hobelwelle System TERSA d=120mm: 5.000 UpMmax. chip removal surface planer to CE: 8 mmmotor 380 Volt / 50 Hz.: 5,5 kWSchallpegel to EN 27960: 82,9 - 88,9 dB(A)Grundausstattung:Elektrik to CE-NormMagnetbremsesuction nozzle d=150mmprotection devicetop bedienbares Schaltpu...

Auction

Detva

8552 km

LASCO RCW 560, VPE 800, SPR 2500, VPE 630

2019

like new (used)

38 days left

Details

This Line is consisting of: 1) 2022 SIMEC MAX 130 ALU automatic circular saw 2) 2020 B+R OK VZT, FP-570-465X805 filter + chip seperating unit 3) 2019 BSN Thermoprozesstechnik 1485 AWO continous heating furnace 4) 2019 LASCO RCW 560 forging roll with ABB robot part handling 5) 2019 LASCO VPE 800 Bending Press with ABB robot part handling 6) 2019 LASCO SPR 2500 screw press for pre-forging with ABB robot part handling 7) 2019 LASCO SPR 2500 screw press for finish-forging with ABB robot part handlin...

Listing

Juszczyn

8483 km

KÖLLE F50 bottom spindle moulder

KÖLLE F50

excellent (used)

€1,800

Swivel spindle milling machine

Call

KÖLLE F50 bottom spindle milling machine with Aigner guides included in the price Spindle diameter 30mm Spindle height 170mm Engine power 4kw Variable spindle rotation on the belt Rotation 3000/4000/5000r.p.m Civknvtph8 Weight about 700kg

Listing

Fröndenberg/Ruhr

7693 km

Kölle F45

1995

excellent (used)

€8,000

Fryer+Pasteurizing c. oven+breading eq's

Call

Used swing spindle moulder Int. art. No. m3439 Manufacturer Kölle type F45 Year of manufacture 1995 No. 2374 spindle swivel -5°/+45 right/left rotation speeds stepless up to 12.000 rpm. power 5,5 kW C00af9ajj9 CE marking weight 1.100 kg Aigner integral fence Feed Haffner item location: 58730 Fröndenberg/Ruhr The machine can be inspected under power. We will gladly send you more photos by e-mail. A forklift / crane for loading is available. Subject to prior sale. There is the possibi...

Listing

Oberkochen

(dealership location)

8006 km

Surface planer

FIMAL PF 530 N Partnership Edition

new

Call

Working width 530 mm Length of the planing table 3.000 mm Number of knives 4-TERSA St. Vvyqme Motor output 5,5 kW FIMAL surface planer type PF 530 N ----- NEW MACHINE "Partnership Edition" Technical specifications: ----- Planing table dimensions: 3,000 x 530 mm Feed table length: 1,800 mm Dressing fence dimensions: 1,500 x 175 mm Swivel range stop: 0 - 45 ° 4-knife cutterblock system TERSA d = 120mm: 5,000 rpm Max. Chip removal dressing according to CE: 8 mm Motor 380 volts / 50 Hz .: 5.5 k...

Listing

Stork Titan + Sarp+ Koppens TBM 400-3000 EL + SARP SFO905

Hajmáskér

8574 km

Stork Titan + Sarp+ Koppens TBM 400-3000 EL + SARP SFO905

like new (used)

€100,000

Tilting Spindle Milling Machine

Call

Complete breading line 400mm. SARP (SFO 905) pasteurizing cont. oven: Structure completely in stainless steel, with adjustable small feet. Lateral panels insulated with rock wool. Belt conveyor completely in stainless steel AISI 304 Heating system realized by two independent burners with close cycle for natural gas. The burners are positioned on the movable belt. C0fs2bkxzx Movement of conveyer with motoreducers and driving pinions. Automatic system for opening and lifting of the cover. Group ...

Listing

Gerolzhofen

7947 km

Panhans 240

1998

used

€9,200

CASADEI F110 lower spindle milling machine

Call

auto. Adjustment with Zero-Master tool probing used, good condition, top equipment, lots of accessories Make Panhans type 240 Year of construction 1998 Machine no. 1187 CE type tested GS wood dust tested Motor boosted 11 kW swiveling from -5° to + 45° Speed levels 3000 / 4500 / 6000 / 9000 rpm. Chtsi8a0ps right-left run Milling arbor diameter 30 mm cast stop jaws large milling fence with fine adjustment - fully equipped 3 digital displays for diameter - depth of cut - jaw offset Protection and ...

Listing

Łabuńki Pierwsze

8596 km

Casadei F110

excellent (used)

€1,800

Call

* spindle diameter 45 mm * 4 kW motor * triangle-star motor start. * 4 speed adjustable on belts in the range of 4/6/8/10 thousand. * manual up/down adjustment * foot brake Rb20b * AIGNER 50 x 15 cm aluminum culagi included. * original paint job * overall dimensions 110 x 90 x 120 cm (L x W x H).

Listing

Hajmáskér

8574 km

Electric oil fryer

STORK TITAN TBM 400-3000 EL

1989

like new (used)

€20,000

SARP (SFO 905) pasteurizing cont. oven

Call

all stainless steel electrically heated 7 x 9 kW C0fo72333t voltage: 3 x 400 V \ 50 Hz frying length 3000 mm belt width 400 mm adjustable speed oil level control manual hoists suitable for fire protection sediment removal system automatic filling system overall dimensions (L x W x H) : aprox. 5 500 x 1 200 x 1 600 mm overall weight: 1 500 kg manufacturing year: 1989 Will send more pictures upon request.

Listing

Hajmáskér

8574 km

SARP SFO 905

2000

refurbished (used)

€80,000